During the winter period I could not work in the storage space because there was no heating. In this period I started working on the engine. First I build myself an engine stand to mount the engine on. After that I took the engine apart.
I have all the parts for a 1835 cc engine but for now the standard 1200 cc should be enough.
Took all the parts of the engine and cleaned everything.
I removed the heating duct and welded the holes shut. I cleaned all the sheet metal and painted the tins. The engine is a standard 1200 cc engine with a few alterations like the air filter and the Stinger exhaust without a silencer.
I used new gaskets alround and filled the engine with new oil. I cleaned the transmission and changed the oil also. I moved the ignition coil to the rear of the fan housing. I started the work on the rear bumper.